Why do we have so many problems with semiconductor devices? Frequently changing temperature, or users’ mistakes lead to a loss of parts due to the instabilities within high-performance amplifiers. If you’re looking for the most reliable and cost-effective amplifiers for your business or music/production setup, our ohm stable amplifiers are the perfect solution.
Solid-state amplifiers are becoming more and more complicated. The many functions that can be integrated into one device make them highly efficient, but at the same time, they require a perfectly spherical voltage supply. Not getting the power you need due to a circuit not being “stable” enough? It’s one of the most common problems when designing electronics circuits.
Amplifiers that cut-out or crackle is so annoying. Sounding awful and stopping in the middle of a gig. There has to be a better way. If you want to keep listening to your favorite classical music but find yourself increasingly unable to distinguish between the highs and lows, then ohm stable amplifiers are exactly right for you.
We invite you to take a look at our website and find out more about how our products can enrich your life. You need ohm stable amplifiers. At ohm audio, we give you powerful tools that help you get your job done fast. We’re not meant to replace the signal processor, but rather be a compliment. With our ohm stable amplifiers, we rid the frustration and limitations associated with using software compressors.
1. Planet Audio AC5000.1D Class D Car Amplifier
The AC5000.1D is a Class D 3 channel amplifier with a maximum of 5000 watts X 1 at 1 ohm stable. The unit has a MOSFET power supply for lower operating temperature and increased efficiency. It brings out the best in your midrange and highs to reproduce clear crisp vocals with plenty of dynamic range and detail without the typical harshness that comes with most high-power amps. Wide bandwidth allows you to connect up to four channels (front, rear, subwoofer) simultaneously and still achieve excellent sound quality.
The versatility allows this amplifier to be used in almost any type of system. This 2 channel amplifier and features a durable Monoblock design, a MOSFET power supply, Class D operation with no capacitors – 500 watts x 1 at 2 ohms (1 kHz) and 5000 watts x 1 at 1 ohm (14.4 VDC), Power and protection LEDs, Switching frequency at
It features easy subwoofer control, pre-amp turn-on lead on front and rear signal inputs, ground lead, and speaker sense input lead for overvoltage protection up to 22V. This unit comes with set screw-type connectors with professional install brackets that can be attached to any sort of enclosure or other materials.
It is stable down to 1 ohm, Features include Variable Gain Control to eliminate distortion and maximize sound quality, computer-selected grade audiophile components, precision computer-trimmed compartmentalized circuit boards to help eliminate excess heat and vibration, gold-plated RCA inputs, gold-plated speaker terminals for precise connections, subwoofer direct input, variable frequency low pass crossover at 50 Hz with 12 dB per octave slope and adjustable cut-off frequency from 40hz to 80hz.
2. Planet Audio PL4000.1D Class D Car Amplifier
The PL4000.1D is a monoblock Class D car amplifier that produces 4000 watts of RMS power at 1 ohm. It has an internal start-up booster circuit that will correct turn on and off glitches, reverse polarity protection, and an over-voltage protection circuit that will shut the amp down before damage occurs from too high of a signal. It is equipped with state-of-the-art MOSFET power transistors, high-speed low loss regulators, Kinetik batteries that are capable of delivering 100% continuous current for maximum starting power and won’t cause a fuse or circuit breaker pops.
The ohm stable amplifiers are designed for serious bassheads that demand incredible thump and get it. It comes with 4000 watts of power at the 1-ohm load. This will deliver incredible sound in the speakers or subwoofers. The amplifier features a MOSFET power supply and the ability to handle low impedance loads. The peak power can reach a maximum of 6000 watts and the RMS of 3000 watts.
This Class D car amplifier from Planet Audio is a monoblock, 4000 Watt, 1 Ohm stable amplifier designed and built for high power and durability. This amazing amplifier features a clean, all-new design and state-of-the-art manufacturing that delivers 420 Watts of RMS power (RMS Power ratings may vary depending on the impedance of the speakers).
It has a digital display that has adjustable settings for your preferred volume and features a smart thermal protection system that will shut it off if it overheats or is driven beyond its specifications using its variable low-pass filter/high-pass filter with adjustable subsonic filter and line input level control. A variable bass boost control allows you to adjust the bass output of your amp from 0-12 dB for fine-tuning your sound as well as having a remote turn on and input selection.
3. Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier
Punch 500W Class-bd Mono Amplifier is a single channel Class-bd amplifier with Punch. The 500W RMS x 1 @ 4 Ohms and the compact size make it perfect for small spaces, such as under the seat or in the trunk. It features variable low-pass and high-pass filters, along with a variable bass boost. This amplifier is also equipped with over-current, thermal, overload, and speaker short protection; an advanced security system that will mute your audio signal and flash a red led if tampering is detected.
The Punch 500 Watt Class D mono amp has a variable low pass crossover, a subsonic filter, and a variable bass boost so you can seamlessly tune your system to any environment and get maximum bass impact with minimal distortion. A remote-level control provides added convenience. This amp can be mounted in any vehicle where space allows and is protected by a sturdy aluminum top cover.
With its ability to deliver 500 watts at 2 ohms, the Punch will power your music with authority, making your old speakers sound like they’re stuck in the ’80s. Whether you’re listening to thumping, bass-heavy dance tracks, or vocals rich with life and texture, you’ll enjoy quality sound from all your sources.
The punch series amplifiers feature a power level control that lets you dial in the maximum output for the amp to give you the deepest boost with amazing clarity and dynamic range at all power levels. This Punch amplifier features both low-pass crossover (50-200 Hz, Butterworth filter slope) and high-pass crossover (50-200 Hz, 12 dB/octave Butterworth filter slope). The Punch amplifier provides switchable and defeat
With its enormous power and performance comes the responsibility to drive it properly. You need an amplifier that is not easily influenced by the car’s electrical system, your source unit, or even the air itself.
4. Hifonics BRX1516.1D Brutus Mono Super D-Class Subwoofer Amplifier.
The Hifonics BRX1516.1D Brutus Mono Super D-Class Subwoofer Amplifier is the latest in audio technology from the world leader in car stereo equipment. This amplifier is used to drive your subwoofers or speakers, bridging the gap between your head unit power and your RMS wattage. The 15-channel Class D amp, powered by a pair of ultra-fine MOSFET power supply modules that aim at maximizing power efficiency while improving sound quality and features LED power (Green) and protect (red) indicators.
This Amplifier is the next generation in-car audio technology, designed to harness the power of digital switching technologies while maintaining the rich heritage and musical nuance of analog amplifiers. The advanced circuitry is completely analog at the input and output, but within the signal path, it’s all digital, with optimized switching schemes and dynamic response control circuitry that make this amplifier as efficient as possible.
Its an amplifier designed to deliver maximum power output at 2 ohms, both in bridged mode and “mono” (4-ohm) mode. It also features high-temp MOSFET power supplies, which are more efficient than conventional power supplies and produce less heat. The 1516.1 is equipped with a bottom-mounted bass level control and an LED power/protect circuit.
This amplifier is a perfect match for large subwoofers like the LXi, SXi, HXi, and DXi. The 1500 watt BRX-1516.1D amp’s components are selected from the highest grade available to ensure sound quality and efficiency comparable to the competition at half the price. Bigger subs plus more power equals better bass! The BX series amplifiers are a brute force when compared to your typical Class A/B amplifier.
These amplifiers can easily run a low impedance subwoofer at full-rated power ratings while still producing minimal THD. The internal hardware that is found in every BRUTUS amplifier such as MOSFET power supplies, high current copper and silver alloy heat sinks, and unique topologies will imbed themselves deep within your music making it extremely smooth.
5. Rockford Fosgate R2-500X1 500-Watt Mono Amplifier
The Rockford Fosgate R2-500X1 amplifier is designed to work with virtually any vehicle, replacing the factory speakers with customized aftermarket gear. It provides 500 watts of RMS power, covering your needs for superior sound and bass from a mono subwoofer configuration. It features a switching power supply, LED indicators for protection, variable crossover control, built-in Wire-to-Wire input, and an integrated high-impact steel mesh grille for maximum durability.
For additional control of the system, this amp features a remote turn-on/off feature. Designed exclusively for us by Rockford Fosgate, these ohm stable amplifiers put out incredibly powerful performances in a very small unit. The quality of their design and construction is amazing, and when combined with a high-performance subwoofer system, these ohm stable amplifiers will make your music sound as good as it deserves to.
It is perfect for powering the front or rear channels of your system with oversized subwoofers or an all-in-one bass bin. Ideal for high-performance competition cars, trucks, and SUVs, this amp features a sophisticated level control along with a DDT speaker this full-range class-D mono amplifier (1.9″ x 6.8″ x 8.5″) has 500 Watts of RMS power, a frequency response of 10 Hz – 100 kHz, and 2 Ohm impedance. The R2-500X1 can easily be wired for 4-ohm impedance rated at 600W.
For added convenience, there is a wired remote gain control that allows you to adjust the level from inside the vehicle. It’s efficient, packing in the power you need, without draining your electrical system. Use the XMAX technology to produce a cleaner, crisper sound when using one or two subwoofers. Plus it’s small, measuring 1.9″ x 6.8″ x 8.5″. You’ll wonder how Rockford made 500 Watts out of such a small package.
6. Taramp’s HD 3000 2 Ohms Class D Full-Range Mono Amplifier
The HD 3000 Series is able to continuously deliver a full range of power for unity gain stable operation into 2 Ohms at any operating frequency between 20Hz and 20kHz. This is accomplished through Taramp’s unique switched-mode power supplies which employ a high-efficiency Buck/Boost converter in conjunction with a frequency varying controller. The end result is robust audio reproduction with reduced distortion and reduced power consumption.
This Amplifier, designed by Taramp’s engineering team to resolve the issue of the amplifier-subwoofer wiring impedance matching, no more complex, and troublesome impedance switching. It is very simple but sophisticated technology which makes it easy for anyone to enjoy beautiful music everywhere. The HD 3000 adopts the latest cutting-edge ICs of class-D amplification and advanced technology in the study of thermal circuit design.
which guarantees stable power supply performance and a great heat dissipation effect. In summary, it is a high-quality product with a competitive price and a comfortable experience. This mono-rated amplifier includes a 24 dB/Octave low-pass filter and produces 350 W of RMS power. The amp has two inputs, one balanced and one unbalanced, along with binding posts for left and right outputs. The housing has two handles for convenient transportation purposes.
This sleek, ultra-compact amp surpasses the power of many subwoofers on the market today. Optimized for SPL, this amplifier is very efficiently designed to produce high levels of clean bass without using a lot of energy. Perfect for systems that need to be moved around a lot from location to location such as mobile DJs and bands, or for permanent installations where space is a premium, like small DJs and restaurants
7. Taramp’s HD 3000 1 Ohm Class D Full-Range Mono Amplifier
The Taramp HD-3000 1 Ohm Class D Full-Range Amplifier provides 750 watts of power from its ultra-low noise and highly efficient design. Using Taramp’s high-frequency switching technology, the HD-3000 amplifier requires very little power to drive a speaker, increasing the reliability of power distribution and cabling. The HD-3000 also features a low impedance audio output that is capable of driving a 4-ohm load and maintaining 1 ohm Class D operation. The push-pull amplifier design gives you sound quality which is unmatched in today’s amplifiers.
It is designed for users that are asking for more power than 2500 can deliver. The HD-3000 features 1 Ohm Stable operation and supports up to 3000 Watts program power and 3000 Watts peak power(program dependent). In addition, the HD-3000 has added protection against short circuit conditions in the output signal path with auto-protection recovery. The HD-3000 was designed to operate efficiently from a single-phase 240VAC dedicated supply.
With music power up to 3000W and home theater power up to 6000W, they possess the ability to drive the most demanding subwoofer application. These amplifiers are stable even under the most off-the-line conditions where other amplifiers perform poorly. Taramp’s HD 3000 can also be built in a way that is easier to repair. It’s a 1 Ohm stable Class D amplifier that will power 2 eighteen-inch transducers with 7 KW of power each.
It combines superior sound quality and high power output called a “real slammer” by one reviewer with top-shelf construction and efficiency that enables it to operate on very low voltages, making it easy to install in cars, RVs, boats, or off-grid home. This amplifier is a powerhouse that utilizes the latest technologies to create the perfect music experience. Three removable/replaceable terminal cup ports make installation a breeze and allow for versatility in any system.
8. Alpine S-A60M S-Series Class D Mono Amplifier
Alpine’s ohm stable amplifiers feature a Class D technology for high power and Hi-Fi sound quality in a small package. These compact yet rugged amps deliver plenty of power able to drive a subwoofer as well as smaller speakers to full volume. Featuring the latest protection circuits, these amps provide ways to protect your components from accidental damage like short circuits and over-currents.
Compact, lightweight, and powerful, all models deliver more power for a rich listening experience. With Advanced Sound Retriever, you get deep sound with remarkable clarity for great musical enjoyment.
This amplifier is ohm stable to allow use with a sub, or as a full range amplifier. Output on this amp is 60 watts RMS x 1 at 4 Ohms, 120 watts RMS x 1 at 2 Ohms, and 240 watts RMS x 1 at 1 Ohm. This amp comes with a brass knob, phase switch, remote sub-level control, pre-filter, and speaker-level inputs and outputs.
Power ratings are as follows: All Channels RMS Power (CEA-2006 Compliant): 60 watts x 4 50 watts x 4 45 watts x 2 Bridged RMS Power: 150 watts x 2 @ 4 ohms 180 watts x 1 @ 2 ohms The amp has a MOSFET power supply with iPod/iPhone controlling capability and can connect to the Alpine TuneIt App for real-time control over bass, treble, midrange, balance, and fader. With 600 watts of MAX power and internal protection circuits, it’s built for high performance.
Designed to fit in the most compact spaces while delivering more power and greater sound quality than competitive amplifiers, the S-Series amplifier features built-in crossovers, variable low-pass filters, variable subsonic filters, a tweeter level control, and a phase switch for accurate system set up and tuning. The S-A60M is designed for bridged mono operation to power a subwoofer. It is compatible with 4-, 8-, or 16-ohm subwoofers.
9. Planet Audio TR3000.1D Class D Car Amplifier
The Planet Audio TR3000.1D Class D Car Amplifier offers a total of 7500 watts peak power and 3000 watts RMS in a 1-ohm stable. Featuring a Digital signal processing controller with variable 12dB/Octave crossovers and 10 audio modes, including; rock, rap, country, pop, and classical. The Planet Audio TR3000.1D also features aluminum heat sinks, gold plated terminals, 4GA speaker level input, 2 sets of independent high-level output, and a constant voltage/current power supply system.
This is a brand new 1-ohm stable amplifier that will make any subwoofer sound better. Planet Audio has designed this amp with a robust MOSFET power supply, top-of-the-line components, and some great features. Planet audio really went all out on this car amplifier and put in features that the other Class D amplifiers just don’t have.
This series of amplifiers set new standards for the quality of sound and power output in its class. The TR (Technology Research) Series amplifiers have more features, more power, and fit better into this ever-changing market.
The frequency response is tailored to the unique demands of low frequencies while a stable ohm assures that this amplifier will drive your subs without fear of clipping and subsequent damage. The high current design enables this amp to quickly recover from any temporary overloads that could be caused by a bass-heavy track, allowing it to maintain a consistent volume.
This amplifier has high and low-level inputs, as well as a pass-through RCA output to daisy chain multiple amps together without having to run large gauge RCA cables through your dash. The patented amp technology and ultra-efficient power supply allow our amplifiers to run cooler and extend overall longevity.
1. DC Audio DC1.2K-A3 1450W RMS 16V Mono Class D Car Audio Amplifier
DC Audio introduces the DC1.2K-A3 a 1500 watt RMS Class D mono amplifier for car audio systems from your favorite brands. This item builds upon the success of the 1.25k and 1.5k ohm stable amplifiers with even higher performance. 600 watts continuous power with a 16-volt cooling fan to keep the amp cool under demanding conditions.
Another great milestone in DC amplifier history, keep an eye out for more, ohm stable amplifiers from DC Audio coming soon!
In terms of power handling, this is massive because it means you can playback tracks at large volumes for extended periods without damaging your power supply, also making it perfect for people who want to build enthusiast systems or compete in sound competitions. The D series is cost-effective but must be used with care due to the lack of protection and thermal shutdown, as these amps draw little to no current from the supply when their output is a short circuit, over-temperature, or under voltage.
The innovative design offers unprecedented efficiency and total harmonic distortion (THD). Every detail of the amplifier has been carefully considered to ensure that the user will enjoy an optimal level of sound quality. DC Audio amplifiers are true high-end amplifiers with meticulous engineering, unprecedented performance, and features for applications ranging from coverage of bass cabinets to control of driver units in full-range systems.
It has a powerful MOSFET power supply, ripple-free DC Volume control, a mono sub-pre-out with separate level control, and a low voltage/high-efficiency switch that allows for the use of multiple amps on the same battery system. The amp also features a Bluetooth input and an AUX input.
Sean Coby is an ex-musician (ATLANTA SOUND) par excellence and well respected among the musician community in Woodbridge, VA. As the chief editor of his https://tompkins.fm, he shares his experience to be an influential musician like him.